Laser suggestion:
ZR, ZRG

Alternatively a line laser is mounted on the housing of the diamond cutting disk and aligned to the cutting edge of the disk. By this it can follow even in case of inclination of the disk.

Laser suggestion:
ZN-24, Z24G

The demand for high-class vanity, kitchen countertops, staircase steps etc. made of marble, granite, tempered glass and special polymer materials is steadily increasing. The manufacturing is done by CNC machining centres on which vacuum cups which fix the material  have to be placed very precisely to avoid damage during machining. After projection of the vacuum cup position the contour of the final part is shown to allow exact material placement. The required data for projection can be either readout from the CNC controller or from CAD files (DXF format).

Laser suggestion:
LP-HFD

A laser line aligned to the diamond cutting disk simulates the cutting line.

Laser suggestion:
ZA, ZN

When cutting glass the laser helps to mark the cutting line.

Laser suggestion:
ZN

When drilling glass the laser beam extends the drill axis and marks the exact entering point of the drill on the material that is to be processed.

Laser suggestion:
ZN

Z-LASER has illustrations and explanations for most applications. Please send us an email about your application or requirement and we will forward you the relevant product information. Please note that this information will only be sent to companies and not to private individuals.

Contact